胶原-单宁树脂的制备及其对水溶液中UO2+2的吸附特性研究

以天然牛皮为原料,经胃蛋白酶处理制得水解胶原;通过胶原-黑荆树单宁-醛反应制备了胶原-单宁树脂(C-TR)吸附材料,并表征了材料的形貌,测定了材料的比表面积、热变形温度等性质。系统研究了C-TR对水溶液中UO22 的吸附特性。结果表明,C-TR对UO22 有较强的吸附能力。当温度为303K、pH=5.0、UO22 的初始浓度2.5mmol.L-1时,吸附容量达到1.49mmolU/g。升高温度,平衡吸附量增大。pH对吸附容量的影响较大,适宜的pH范围为5.0-6.0。C-TR对UO22 的吸附平衡符合Freundlich方程。吸附动力学可用拟二级速度方程来描述。C-TR对UO22 的吸附基本不受NaCl影响,该吸附材料可望用于海水中铀的富集和分离。     

胶原纤维固化黑荆树单宁吸附V(V)的研究

研究了胶原纤维固化黑荆树单宁对V(V)的吸附。采用不同温度、pH值等条件进行吸附研究,并进一步探讨了固化黑荆树单宁的吸附动力学和吸附柱动力学及其吸附机理。结果表明,该材料对V(V)的吸附平衡符合Freund lich方程,温度对吸附平衡的影响不明显;吸附动力学可用拟二级速度方程来描述,该材料同时具有良好的柱动力学特性;V(V)的吸附过程可能存在三个反应,即V(V)与吸附剂之间发生氧化还原反应生成V(IV),V(IV)和-COOH之间发生离子交换反应,以及V(IV)与单宁的邻位羟基发生螯合。     

原子吸收光度法间接测定茶叶中单宁

基于乙酸铜与单宁生成沉淀，原子吸收光度法测定剩余铜的原理，间接测定茶叶单宁，样品前处理简单，测定单宁的线性范围为１￣４０ｍｇ／Ｌ，重复测定７次１０ｍｇ／Ｌ的单宁溶液，相对标准偏差为３．１６％，已用于几种不同茶样中单宁含量的测定。     

1, 5-Rearrangement of enol acylates of aryl 1H.-1, 2, 4-triazol-1-ylmethyl ketones

The rearrangement of enol acylates of aryl 1H-1, 2, 4-triazol-1-ylmethyl ketones at 140–150°C in acetic anhydride is studied. The migration of the acyl group to the C(5) atom of the heterocycle is found to be intramolecular. The characteristics of the original and final products are presented. X-ray structural studies of the enol acetates of 2, 4-dichlorophenyl 1H-1, 2, 4-triazol-1-ylmethyl ketone and 2, 4-dichlorophenyl 5-acetyl-1H-1, 2, 4-triazol-1-ylmethyl ketone are carried out.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 560–564, March, 1993.     

Effect of the Structure of the Acyl Group on the Kinetics of Exchange between O-Nucleophiles

We have studied the rate of 15 reactions of acyl transfer from O-acyl salts of 4-dimethylaminostyryl-4-pyridine N-oxide to 4-morpholinopyridine and 4-dimethylaminopyridine N-oxides in acetonitrile solutions. Analysis of the results based on the Shaik – Pross approach and the Marcus equation shows that if the structure of the acyl group is varied, then the reactivity is determined by such parameters as the resonance interaction in the transition state (B) or the internal barrier (G ₀) of the reaction.     

Hydrolyzed Tannin from <Emphasis Type="Italic">Euphorbia glareosa</Emphasis> Leaves

Hydrolyzed tannin (I), the structure of which was established using chemical investigations and UV, IR, PMR and ¹³C NMR spectra, was isolated from Euphorbia glareosa leaves.__________Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 250–251, May–June, 2005.     

Flow injection system for hydrolysable tannin determination

A flow injection system was proposed to evaluate the transient product of a colorimetric reaction between hydrolysable tannin and potassium iodate (KIO₃) solution. The system optimization was accomplished by using statistical methods based on experimental design. Flow rate of KIO₃ solution, sample volume, carrier flow rate, and reaction coil were the selected factors for evaluation. On screening step, complete factorial 2⁴ was used and two levels for each selected factor were studied. For the optimization phase, a centered face composite design 2² + star was employed to evaluate sample volume and flow rate of KIO₃ solution, which were the factors identified in the screening phase as having more influence on the absorbance signal. After optimization, the proposed system was compared with batch determination. Some characteristics, such as analytical frequency, reagent consumption and chemical residues generation presented better results by the use of the proposed system if compared with batch method. The system presented good repeatability with standard deviation lower than 3%, for n = 10, linearity (R² = 0.9974) for tannic acid standard, analytical frequency of 15 injections h^− 1 and limit of quantification of 24 mg L^− 1 of tannic acid. Good results were obtained when the proposed system was applied to hydrolysable tannin determination in Stryphnodendron barbatimão, Eucalyptus citriodora and Phyllanthus niruri, samples of plants commonly used in popular medicine.     

Cyclic vinylogous triflate hemiacetals as new surrogates for alkynyl aldehydes

Cyclic vinylogous triflate hemiacetals can serve as ‘synthetic equivalents’ for alkynyl aldehydes: treatment of a vinylogous triflate hemiacetal with excess amounts of Grignard reagents produces acyclic alkynyl alcohols in good to high yields. This transformation likely involves the Grob-type C-C bond cleaving fragmentation to form the alkynyl aldehyde in situ. Subsequent nucleophilic attack of the Grignard reagent furnishes secondary alkynols. Vinylogous triflate hemiacetals are easily prepared by DIBALH reduction of vinylogous acyl triflates, which are derived from cyclic 1,3-diketones.     

Synthetic studies of proanthocyanidins. Part 3: Stereoselective 3,4-cis catechin and catechin condensation by TMSOTf-catalyzed intramolecular coupling method

TMSOTf-catalyzed intramolecular condensation for catechin and epicatechin units are described. A potential electrophile and a nucleophile were connected with diester linkers and TMSOTf-catalyzed condensation was examined. In comparison with intermolecular catechin and catechin condensation, the intramolecular condensation required high reaction temperature and reversed 3,4-cis product was obtained. The condensed product was transformed into the natural 3,4-cis (+)-catechin-(4β→8)-(+)-catechin dimer.